crecode.com

Download at Boykma.Com in Software Maker barcode 39 in Software Download at Boykma.Com




How to generate, print barcode using .NET, Java sdk library control with example project source code free download:
Download at Boykma.Com using software tocompose barcode code39 for asp.net web,windows application EAN/UCC-14 6 . Gateway Name: This is the name of the gateway. Ensure that the name you choose is the one that the Proxy is configured with to identify your media gateway. The default is set to the SIP domain name (from the example that has been used it would be set to xyzcompany.

com). DNS Query Type: This is for querying the SIP domain. It can be set to A-Record, DNS NAPTR, or SRV records.

The default setting is set to SRV. Gateway Name for OPTIONS: The OPTIONS Request-URI host part contains either the gateway"s IP address or a string defined by the parameter "Gateway Name". If this is enabled, the gateway sends its name as the host part of the SIP URI.

If it is disabled, the IP address is used. The default is enabled (checked). Hot-Swap Redundancy Mode: The user can enable or disable proxy hot-swap redundancy mode.

This allows SIP INVITE/REGISTER messages to be routed to a redundant proxy/registrar server if the primary proxy/registrar server does not respond. This is not required by sipXecs (unchecked) because SRV records are used for routing between redundant SIP proxies. Number of RTX before Hot-Swap: The AudioCodes default value is 3 retransmits before switching to a redundant SIP Proxy.

This setting is not needed either because of the use of SRV records. Challenge Caching Mode: To reduce the number of SIP messages, challenges can be cached. Select the desired level of challenge caching to use with SIP proxies.

The default is set to none (challenges are not cached). Mutual Authentication Mode: This mode selects whether Authentication and Key Agreement (AKA) digest authentication information are optional or mandatory for incoming requests. If it is set to "Mandatory", incoming requests without AKA information will be rejected.

The default setting is "Optional".. Click on the Apply button to keep any changes made on this page. [ 149 ]. Download at Boykma.Com Connecting to the World with sipXecs DTMF & Dialing The Gateway DTMF & Dialing page is used to configure how the gateway interacts with dialed digits. The following configu barcode 3 of 9 for None ration options are available on this page (click on Show Advanced Settings to reveal all options): Dialed Digits Max. Length: The maximum dialed number length allowed. The default is set to 14 digits.

Inter-Digit Timeout: The gateway"s dial time-out before end of dialed string is automatically set. The default is 4 seconds. Declare RFC2833 in SDP: RFC2833 determines how dialed digits (DTMF) are dealt with within a phone call.

The gateway needs to be set to declare RFC2833 in the Session Description Protocol (SDP). DTMF is done in-band with the media services. TxDTMFOption: Transmit DTMF options in order of priority (all are set to no negotiation).

RFC2833 DTMF Payload Type: The RFC2833 DTMF Relay dynamic payload type. Allowed ranges are: 96-99 and 106-27. The default value is 96.

Flash Hook Detection: Reported Period the flash-hook period (in milliseconds) that is reported to the FXO port. The default value is 790 ms..

Click on the Apply button to keep any changes made on this page. [ 150 ]. Download at Boykma.Com 6 . Advanced Parameters The Advanced Paramete Software Code 39 rs settings, shown as follows, are accessed by clicking on the Advanced Parameters item in the lefthand menu and are a collection of AudiCodes-specific settings.. The following configu ration options are available on this page (click on Show Advanced Settings to reveal all options): Secure SIP Calls: If this is enabled, gateways will only accept SIP calls from IP addresses listed below. The default is disabled (unchecked) Accepted IP Addresses: They are used in conjunction with the above setting. It is a space-separated list of IP addresses from which gateway will accept the calls.

It is taken into account only if Secure SIP Calls is enabled. The default is the IP address provided for the PBX during install. Digit Delivery to Telephony Port: This setting enables a digit string to be played to the port at the far end, after off-hook.

The default is disabled (unchecked). Digit Delivery to IP: This setting enables a digit string to be played to the port at the far end, after off-hook. The default is disabled (unchecked).

DID Wink Support: When this is enabled, the gateway can connect to EIA/TIA 464B Loop Start DID lines. Both generation and detection are supported. The default setting is disabled (unchecked).

. [ 151 ].
Copyright © crecode.com . All rights reserved.